Custom Full Frame Bag
.These custom full frame bags are constructed of VX21, VX42 or Cordura side panels with Black Cordura Ballistic on the seat and down tube. Top Tube is color matching. The seat, top and down tube are padded to prevent items from rattling around. The seat and down tube are also lined with a light colored rip stop fabric to increase visibility inside the bag.
Bags are 2.75" wide at the seat tube to 3.5" at the head tube as a standard however this can be changed at your request. All zippers are #10 YKK Aquaguard or Nylock with hoods. All seams are double stitched with 100% Polyester thread for durability against UV and mildew and seams are finished to prevent fraying.
The zippered map pocket (if added) goes on the non-drive side 1.5 inches down. Same place as zipper on drive-side. The pocket depth is generally half way down the length of the bag. Double mesh pockets inside and a key holder.
Velcro attachment/ Bolt-on attachment
If velcro: I will need a high resolution photo with ruler for scale or a cardboard cut out of the inside of your frame, including some pictures of the template in your frame so I can see where attachment conflicts may be. I want to make sure the bag fits your bike perfectly!
If bolt-on: You will need to make me your own template marking the braze-ons accurately and mail it to me. See Custom Frame Bag Instructions page for detailed directions for both scenarios.
The hydration port comes out the top panel of the bag near the head tube. If you plan on using the hydration port, this is the set-up I recommend. The Platypus 2.0 L bladder with a quick disconnect. I've added the picture description to your left above so you can see what it looks like. It makes refilling the bladder much easier as you don't have to remove the tube from the hydration port:
* If ordering dyneema fabric, write color choice in "notes" at check out
Shipping to US is an additional $9
~International shipping please request quote.
Handmade in Herriman, UT.